BYD Seal — Using Mode 2 Charging Cable*

WARNING CAUTION equipment is 50°C. Store the product in a cool and dry place when it is not in use. ● See the charging instructions for specific charging precautions. ● When charging, do not place the equipment in the trunk, under the front of the vehicle, or near the tires. REMINDER ● It is recommended to contact a BYD authorized dealer or service provider or local electrician to select an appropriate power supply according to requirements of the charging equipment. ● When using the equipment, prevent it from getting rolled over by the vehicle, dropped, or trampled on. ● It is not recommended to use any additional wire or adapter/ connector.

If an additional adapter is required, choose a suitable cable diameter (≥1.5 mmІ) and the adapter/ connector parameters must meet requirements. ● Charging equipment grounding instructions: The equipment must be properly grounded. In the event of failure or damage to the equipment, the grounding cable provides a minimum impedance to circuit discharge and thereby reducing the risk of electric shock. 04 USING AND DRIVING ● Never use the charging equipment if the household power strip cable becomes soft, if the charging connector cable is worn out, if the insulation layer is cracked, or in case of any other damage.

● The equipment comes with a ground cable connecting its ground point with that of the power plug, which must match a properly installed and well- grounded power supply outlet. ● Never use the equipment when the charging connector, power plug, or power strip is disconnected or broken, or if there is any sign of surface damage. 2. Charging ● With the vehicle doors unlocked and preferably powered off, press the charge port door to open it. ● To prevent failure of the charge port door, do not open and close it repeatedly. The recommended time interval for opening and closing the port door is at least one second.

CAUTION ● The charging cable must not be placed in a spiral during charging, as this will affect heat dissipation. ● Open the vehicle charge port cap, and make sure that no obstacles exist between the head of the charging 85