CAUTION ● Unlock the charge port door, and then open the port door and cap. ● Avoiding damage to the discharging equipment (precautions for discharging equipment): ● Check before discharging: 1. Ensure that the battery capacity of the vehicle to be discharged is not below 15%. ● Prevent the discharging equipment from suffering any mechanical impact such as dropping or hitting. 2. Ensure the V2L connecting device casing is not cracked, and its plug is free from rust or obstructions. 3. Ensure that there is no water or foreign material inside the charge port and that metal terminals are not damaged and free from rust or corrosion.
● Do not place the discharging equipment near heaters or other heat sources. ● Before discharging, please confirm the vehicle SOC and estimate the remaining driving range. 04 ● Do not discharge if the above second or third condition is found; otherwise, short circuit or electric shock so caused could lead to personal injury. USING AND DRIVING ● Before V2L discharging, ensure that the load is turned off. ● Connect the discharge connection device: REMINDER ● Connect the V2L discharging connector to the charge port and confirm that it is connected in place. ● The V2L function is recommended only when the vehicle SOC is high. ● The V2L function is restricted when the vehicle SOC is low.
● After the switch button* on the discharging socket is pressed, the socket indicator stays on (red), indicating that the socket can be used. ● When the vehicle is powered off, the static power consumption of the vehicle will increase if the V2L connection device is connected for an extended period without any output. Therefore, removing the discharging/charging connector when the device is not used is recommended. ● Discharging starts: ● After the connection is made, discharge begins and respective information is displayed on the instrument cluster. Stopping discharging External Discharging ● Stop discharging: ● Disconnect the load. Starting discharging ● Disconnect the discharging device:
● Before discharging, disarm the anti- theft alarm system. ● With the vehicle unlocked, remove the connector from the charge port. 91