BYD Seal — Regenerative Braking Intensity Settings

1. Open the trunk. There is an emergency cable for the charging connector on the right side panel inside the trunk. the display mode set last time will be maintained. 2. Unlock the charging connector by unlocking the emergency cable latch and pulling the emergency cable. REMINDER ● When the Dynamic range display mode is set: 3. Reset the emergency cable latch after the unlocking is completed. ● The driving range that is displayed after a full charge may vary, depending on calculations of the energy consumed the last time the vehicle is used.

● The displayed driving range is adjusted based on whether the A/C is on, selection of driving mode, and the driver's driving habits, so that this range can be closer to the estimated remaining range under current use. 04 USING AND DRIVING REMINDER Regenerative Braking Intensity Settings ● If the above functions are abnormal or fail, contact a BYD authorized dealer or service provider. Energy regeneration: In this process, the motor will generate reverse torque when the vehicle is decelerating, and the generated energy will be recovered and reused to improve the energy utilization rate of the vehicle.

Driving Range Display The "Driving Range Display Mode" can be set to improve driving experience. The default setting is "Standard”. You can personalize it by Infotainment touchscreen ● Braking regeneration: → New energy → Energy management. ● When the vehicle is running in D position, if you completely release the accelerator pedal and depress the brake pedal, and the vehicle is in a stable state, priority is given to responding to motor regeneration for deceleration during braking and deceleration.

When the motor capacity is insufficient, the hydraulic brake will actively intervene to maintain the deceleration demand of the vehicle, and the generated energy will be recovered to improve the vehicle economy. ● Standard mode: displays the driving range based on the result of comprehensive working condition test. ● Dynamic mode: displays the estimated driving range based on the available battery power and current average energy consumption. ● The set driving range display mode is memorized by the system. When the vehicle is powered off and then on, 93