WARNING do not touch any high-voltage components (such as battery assembly) or cables (in orange) connecting components. If there are bare wires with destroyed insulation inside or outside the vehicle, do not touch them to avoid electric shock. 01 SAFETY ● If the liquid leaks into some parts of the vehicle, do not touch the liquid, because it may be the electrolyte of the 12V battery. If the fluid contacts the skin or eyes, flush with plenty of water (preferably boric acid solution) and seek medical attention to avoid severe injury. Enabling anti-theft system 1. Power off the vehicle. 2. Have all occupants exit the vehicle. 3. Lock all doors.
The anti-theft indicator remains on for 10s until the anti-theft system is automatically activated. After that, the anti-theft indicator starts flashing. ● If the vehicle catches fire, use a special fire extinguisher to put out the fire or wait for the arrival of firefighters. 4. Before leaving, confirm this indicator is flashing. Make sure no passengers are in the vehicle while setting the alarm. Unlocking any door from the inside can activate the system. ● If the vehicle needs to be towed, please tow it with all four wheels off the ground. If the wheels touch the ground during towing, the motor may continue to generate electricity, resulting in electric leakage.
Triggering the alarm ● The anti-theft alarm is triggered when: ● a door, trunk lid, or hood is unlocked without the smart key; or ● the vehicle is powered on without the smart key. Anti-theft System Releasing the alarm Anti-theft System ● The anti-theft alarm is released when: ● doors are unlocked with the smart key; If the vehicle is in anti-theft state and any door is opened, the system will sound an alarm and the turn signals will flash to prevent the vehicle from being stolen. ● a door is unlocked with the microswitch; ● the trunk lid is opened remotely with the smart key; ● the vehicle is started remotely with the smart key; or 41