Depletion of intelligent key battery power If the electronic smart key indicator does not flash and the car cannot be started with the start function, the battery may be exhausted and should be replaced as soon as possible. Saving of battery power ■ The key communicates with the vehicle, even if the vehicle is not driven. Therefore, do not leave the key within the vehicle or within 2m reach to the vehicle. ■ To re-activate the intelligent entry and start system, please use any of following operation methods: ● The driver carrying the electronic smart key presses the micro switch on the front outer door handle. ● Perform the wireless remote operation.
■ If the smart key receives strong electromagnetic waves for a long time, the battery power will be exhausted. The smart key must be at least 1m away from the following devices: ● TV ● PC 60 3-1 Key and door Tip The intelligent entry and start function probably can’t work normally under following conditions: ● Presence of strong electromagnetic wave emitting facility nearby, such as television tower, power generation station, and broadcasting station. ● Carrying of intelligent key along with communication device such as interphone and mobile phone. ● When the smart key is in contact with or covered by a metal object. ● Quick operation of door handle.
● When the smart key is close to the door handle. ● Low battery power level. ● The smart key is close to a high voltage device or a device that generates a noise. ● When the smart key is carried along with another car`s smart access and start system key or any other device that generates a radio wave. ● Even within the triggering range, the intelligent key probably can’t work normally at some positions (Such as on instrument panel, in glovebox, and on floor).