3-2 Seat During driving process all passengers in the car must maintain the seat backrest upward, their backs against the seat backrests and wear the seatbelts properly. Notes on seat adjustment: Adjust the driver's seat so that the foot pedal, the steering wheel and the dashboard controller are all within the easy control range of the driver. 62 3-2 Seat Seat notices Warning ● Do not drive the car until all passengers are seated properly. ● Do not sit on the folded seat backrest, in the luggage compartment or on the luggage.
Otherwise, In case of an emergency brake or a collision, any passenger who is not seated correctly in the seat or does not wear the seatbelt normally may be seriously injured. ● Do not allow the passenger to stand up or move between the seats during driving process. Otherwise, the passenger may be seriously injured in case of an emergency braking or a collision. Tip ● The driver seat cannot be adjusted during driving process, so as to prevent the lose control of the car from its uncontrollable movement. ● When the seat is adjusted, it cannot hit any passenger or luggage.
● After the front and rear position of the seat is adjusted manually, must ensure that the seat is locked by moving it back and forth. ● After the seat backrest is adjusted, must lean back on the body to confirm that the seat backrest is locked. ● Do not place any object under the seat; order to affect the seat lock mechanism or accidentally push the seat position adjustment lever upward, resulting in the sudden seat movement and the lose control of the car. ● When the seat is adjusted, do not put the hand under the seat or near the operating parts the order to fingers may be crushed.
● When the seat cushion depth is measured, the front and rear position of the seat is the limit positions of the slide rail, and the backrest has the design angle of 25°.