C2SBM-Q User's Manual versa. If the option is set to “4-pin”, the fan speed will be controlled by Pulse Width Modulation (PWM). Select “Workstation” if your system is used as a Workstation. Select “Disable” to disable the fan speed control function to allow the onboard fans to constantly run at full speed (12V). The Options are: 1. Disable and 2. Optimized for Workstations with 4-pin. Note: In the Windows OS environment, the Supero Doctor III settings take pre- cedence over the BIOS settings. When first installed, Supero Doctor III adopts the temperature threshold settings previously set in the BIOS.
Any subsequent changes to these thresholds must be made within Supero Doctor, since the SD III settings override the BIOS settings. For the Windows OS to adopt the BIOS temperature threshold settings, please change the SDIII settings to be the same as those set in the BIOS. Voltage Monitoring The following items will be monitored and displayed: Vcore A, 12V, V_DIMM, 5V, 3.3V, -12V, 3V Standby, Vbatt. 4-20