Solenoid 1 Remove the following assemblies: Toner cartridge, media tray and formatter pod. See “Toner cartridge” on page 15 through “Cable pod” on page 17. Left side, back, and right side covers. See “Left side cover” on page 18 through “Right side cover” on page 24. 2 Unplug the brown solenoid wire connector (callout 1) from the ECU and carefully unwind the solenoid harness from the harness lance points (callout 2). 2 2 2 1 Figure 16. Disconnect the solenoid wire harness Q1342-90910 External assemblies 27