Flatbed intermediate PCB 1 Remove the following components: • flatbed right cover—See page 114. • flatbed left cover—See page 115. • glass—See page 118. 2 Remove two screws (callout 1) and remove the flatbed-mount cover (callout 2). 1 2 1 2 Figure 148. Flatbed intermediate PCB (1 of 2) 3 Disconnect four ribbon cables. Note Two of the cables are ZIF cables, and the connectors do not have retaining clips. CAUTION The retaining clips on the two center connectors are fragile and can break easily. 160 Chapter 6 Removal and replacement C8523-90921