22 Remove two screws (callout 18), and remove the reinforcement rail. Note You might have to work the rail loose. 18 18 Figure 172. Lower registration roller assembly (9 of 10) 23 With the assembly open, loosen one screw (callout 19) on the registration belt tension plate. 19 19 Figure 173. Lower registration roller assembly (10 of 10) 24 Rotate the plate to release tension on the registration belt. 25 Retighten the screw. 26 Remove two c-clips (one on each end of the shaft). 27 Slide off two bushings (one on each end of the shaft). 28 Slide out the lower registration assembly with the gear.
To reinstall When reinstalling, remember to apply tension to the registration belt (loosen the screw, rotate the plate back, and tighten the screw). 176 Chapter 6 Removal and replacement C8523-90921