ADF and glass calibrations ADF calibrations Left side front calibration Note Before beginning the left side front calibration, perform the tray registration calibration on the print engine. To perform the tray registration calibration, touch MENU , then touch CONFIGURE DEVICE , then touch PRINT QUALITY , then touch SET REGISTRATION , then touch SOURCE , and then touch PRINT TEST PAGE . Follow the instructions on the printed registration page to complete the registration setting. Note Make sure you perform tray registration for all of the trays. 1 Download the HP LaserJet 9000mfp calibration target and the HP LaserJet 9000mfp calibration values chart.
2 On the MFP to be calibrated, print the calibration target on ledger or A3 paper. Figure 196. Left side front calibration (1 of 4) 3 Print two copies of the calibration values chart on ledger or A3 paper. C8523-90921 ADF and glass calibrations 209