14 Connect the tray 4 power cord to tray 4. 15 Slide the finishing device toward the MFP and lock it in place. Note Adjust the blue levelers on the finishing device to make sure no gap exists between the finishing device and the MFP. 16 To attach the stacker bin, align the slots on the stacker bin with the metal bar on the finishing device. Push in the stacker bin firmly. Note Locate the paper stop clips and make sure they cradle the connecting rod. The graphic below (callout 3) indicates the incorrect installation of the paper stop clips. Figure 17. Installing the finishing device (2 of 2) 17 Attach the face-up bin. 18 Press the power button to turn on the MFP.
The READY message appears on the control panel when the MFP has warmed up. 19 Make sure the LEDs on the front of the finishing device, tray 4, and the MFP are green. This indicates that the finishing device and the MFP are functional. Testing MFP printing and copying functions 1 Adjust the paper guides in the trays for letter- or A4-size paper. Load paper in each tray. 2 Print a configuration page from the MFP control panel. 3 Make a copy of the configuration page by placing it on the glass. 4 Make a copy of the configuration page using the ADF. 36 Chapter 2 Product requirements C8523-90921 2 3 2