Settings and defaults Most of the MFP printing decisions are based on temporary settings or on factory defaults. Note Most of the settings you send from software applications override MFP defaults. Temporary settings are the values set through your software application for the current print job. Temporary settings remain in effect until the current print job is finished. Control panel defaults are the values entered by selecting a control panel item on the touch screen and then touching it. A bullet ( ) next to the item name indicates that it is now the default. The MFP retains default settings even when power is turned off.
Factory defaults are preset at the factory and are the default values for each menu item. Factory default values are listed in table 8. Setting the display language Method 1 1 Using the touch screen, touch MENU to open the menus. 2 Touch CONFIGURE DEVICE , and then press to scroll to system setup. 3 Touch SYSTEM SETUP , and then press to scroll to language. 4 Touch LANGUAGE to activate the selection screen. 5 Select the language you want, and then touch OK . Method 2 1 Press and hold START while turning on the device. 2 Hold START until all three error lights are illuminated at the same time. 3 Press or to scroll to the language you want, and then press START .
Setting tray registration 1 Using the touch screen, touch MENU to open the menus. 2 Touch CONFIGURE DEVICE . 3 Touch PRINT QUALITY . 4 Touch SET REGISTRATION . 5 Touch SOURCE . Select the tray that you want to set registration. 6 Touch PRINT TEST PAGE. 7 The registration page prints. Follow the instructions on the page to complete the registration setting. Note The tray registration can only be performed using letter or A4 paper. C8523-90921 Settings and defaults 41