Using HP Web JetAdmin Note This procedure requires that HP Web JetAdmin version 6.1 or later is installed. Complete the following steps to upgrade the firmware for a single MFP through HP Web JetAdmin after downloading the RFU file from the HP website. 1 Start HP Web JetAdmin. 2 Enter the internet protocol (IP) address or IP hostname of the MFP in the Quick Device Find field, and then click Go . The printer Status window appears. 3 Click the right arrow on the toolbar to show the Update button. 4 Click Update . 5 When prompted for the type of update to perform, click Update Printers , and then click Continue . 6 Under Upload new firmware image:
, click Browse to locate the RFU file you downloaded from the http://www.hp.com/go/lj9000_firmware website. 7 Click Upload to move the RFU file from the hard drive to the HP Web JetAdmin server. 8 Refresh the browser. 9 Select the RFU file from the Select new firmware version: drop-down menu. 10 Click Update Firmware . HP Web JetAdmin sends the selected RFU file to the MFP. Also, HP Web JetAdmin 6.1 or later can be used to perform multiple installations. 1 Start HP Web JetAdmin. 2 Create a device group. A simple way to do this is to: a. Click Devices on the Choose drop-down menu. b. Click Device Model from the Filter drop-down menu. c. Type “iy9000lw” in the Criteria (Optional) field. d.
Click Go . 3 In the Device List , select the printers you want to include in the group and then click Create Group . 4 When prompted, type a name for the new device group, and then click OK . 5 Click Update . 6 When prompted for the type of update to perform, click Update Printers , and then click Continue . 7 From the list of HP Devices, select the printers to be upgraded, or click Select All . 8 Click Update to install the new MFP firmware. C8523-90921 Remote firmware upgrade 53