Supermicro A+ Server 2021TM-BTRF/BIBXRF — Supermicro A+ Server 2021TM-BTRF/BIBXRF User Manual PDF (EN)

Chapter 5: Advanced Serverboard Setup Fan Headers The H8DMT has four 4-pin proprietary fan headers. Each fan header supports one 4-pin fans with PWM mode. See the table to the right for pin defi nitions. Pins 1-3 of the fan headers are backward compatible with the traditional 3-pin fans. (Fan speed control is supported with 4-pin fans only.) The onboard fan speeds are controlled by Thermal Management (via Hardware Monitoring) under the Advanced Section in the BIOS. The default is disabled. Ethernet LAN Ports Two Gigabit Ethernet LAN ports (designated LAN1 and LAN2) are located beside the COM 1port.

A dedicated LAN is located above the USB ports on the H8DMT-F/ H8DMT-IBXF serverboards as a Dedicated LAN port for IPMI use. All these ports accept RJ45 type cables. Please refer to the LED Indicator Section for LAN LED information. Overheat LED/Fan Fail (JOH1) The JOH1 header is used to connect an LED to provide warning of chassis overheating. Refer to the table on right for LED status and pin defi nitions. Chassis Intrusion The Chassis Intrusion header is designated JL1.

Attach an appropriate cable from the chassis to inform you of a chassis intrusion when the chassis is opened 5-17 Fan Header Pin Defi nitions (FAN1-4) Pin# Defi nition 1 Ground (Black) 2 +12V (Red) 3 Tachometer 4 PWM Control Overheat LED Pin Defi nitions (JOH1) Pin# Defi nition 1 3.3V 2 OH Active Chassis Intrusion Pin Defi nitions (JL1) Pin# Defi nition 1 Intrusion Input 2 Ground