Do not start sending the image yet... Invoke this application for disaster recovery. Do you wish to continue? y/n [n]: y Note, if the console port is attached to a modem, both the console port and the modem must be operating at the same baud rate. Use console speed 9600 bps for download [confirm] !--- Нажмите клавишу Enter . Download will be performed at 9600. Make sure your terminal emulator is set to this speed before sending file. Ready to receive file ... !--- Как только вы увидите сообщение "Ready to receive file" ("Готов принять файл"), !--- отправляйте файл с Microsoft HyperTerminal по протоколу Xmodem. !--- Для отправки файла выполните на HyperTerminal следующие действия:
!--- 1) В меню HyperTerminal выберите Transfer > Send File . !--- Это приведёт к появлению окна "Send File". !--- 2) 2) Нажмите "Browse" , чтобы выбрать файл. !--- 3) Убедитесь, что протоколом является Xmodem. !--- Если указано другое, выберите Xmodem в раскрывающемся меню. !--- 4) Нажмите Send . !--- Начнется передача файла. Returning console speed to 9600. Please reset your terminal emulator to this speed... Download Complete! Self decompressing the image :
################### ################################################## ################################################## #################### [OK] Restricted Rights Legend Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013. cisco Systems, Inc.
170 West Tasman Drive San Jose, California 95134-1706 Cisco Internetwork Operating System Software IOS (TM) MSFC Software (C6MSFC-BOOT-M), Version 12.1(4)E1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1) Copyright (c) 1986-2000 by cisco Systems, Inc. Compiled Mon 13-Nov-00 17:23 by eaarmas Image text-base: 0x60008950, database: 0x603E0000 cisco Cat6k-MSFC (R5000) processor with 114688K/16384K bytes of memory. Processor board ID SAD0350047X R5000 CPU at 200Mhz, Implementation 35, Rev 2.1, 512KB L2 Cache Last reset from power-on X.25 software, Version 3.0.0. 123K bytes of non-volatile configuration memory. 4096K bytes of packet SRAM memory. 16384K bytes of Flash internal SIMM (Sector size 256K).
Press RETURN to get started! 00:00:02: %SYS-5-RESTART: System restarted -- Cisco Internetwork Operating System Software IOS (TM) MS Router(boot)>