7. Connection Procedure 22 7 The PCU Setting Window is displayed. Select Network Setting from the project tree on the left side of the Window. Confirm that #17 New Slave _ E3NW-ECT Communication Unit for Digital Type Sensor 60 inputs(V1.0) was added. *The model and version may differ depending on the device used. 8 Click the Remote I/O Input/Output Memory Area Allocation List Tab that is on the right side on the PCU Parameter Setting Window. Confirm that node address #17 is displayed and the I/O Memory Areas are set as follows: •Input offset: 0 •Input address: 3900 •Input size: 10 bytes •Output offset: - •Output address: - •Output size: 0 byte 9 Select Verify Network from the Network Menu.
10 Confirm that Matched is displayed on the Network Verification Result Dialog Box, and click the OK Button.