Generating Interim Service Accounting Records Perform this task to enable the generation of interim service accounting records at periodic intervals for subscribers. Before you begin RADIUS Attribute 85 in the user service profile always takes precedence over the configured interim-interval value. RADIUS Attribute 85 must be in the user service profile. See the RADIUS Attributes Overview and RADIUS IETF Attributes feature document for more information. If RADIUS Attribute 85 is not in the user service profile, then the interim-interval value configured in Generating Interim Accounting Records is used for service interim accounting records.
Note Procedure Configuring Accounting Generating Interim Service Accounting Records Command or Action Purpose • The value argument specifies the intervals for accounting update records (in minutes). • The disable keyword disables periodic accounting. Step 5 end Example: Device(cfg-acct-mlist)# end Exits accounting method list configuration mode and returns to privileged EXEC mode. Command or Action Purpose Step 1 enable Example: Device> enable Enables privileged EXEC mode. Enter your password, if prompted. Step 2 configure terminal Example: Device# configure terminal Enters global configuration mode. Step 3 subscriber service accounting interim-interval minutes Example:
Device(config)# subscriber service accounting interim-interval 10 Enables the generation of interim service accounting records at periodic intervals for subscribers. The minutes argument indicates the number of periodic intervals to send accounting update records from 1 to 71582 minutes. Configuring Accounting 18