Wed Jun 27 04:45:00 2001 NAS-IP-Address = “172.16.25.15” NAS-Port = 5 User-Name = “username1” Client-Port-DNIS = “4327528” Caller-ID = Acct-Status-Type = Start Acct-Authentic = RADIUS Service-Type = Framed Acct-Session-Id = “0000000E” Framed-IP-Address = “10.1.1.2” Framed-Protocol = PPP Acct-Delay-Time = 0 User-Id = “username1” NAS-Identifier = “172.16.25.15” Wed Jun 27 04:47:46 2001 NAS-IP-Address = “172.16.25.15” NAS-Port = 5 User-Name = “username1” Client-Port-DNIS = “4327528” Caller-ID = Acct-Status-Type = Stop Acct-Authentic = RADIUS Service-Type = Framed Acct-Session-Id = “0000000E” Framed-IP-Address = “10.1.1.2” Framed-Protocol = PPP Acct-Input-Octets = 3075 Acct-Output-Octets = 167 Acct-Input-Packets = 39 Acct-Output-Packets = 9 Acct-Session-Time = 171 Acct-Delay-Time = 0 User-Id = “username1” NAS-Identifier = “172.16.25.15” Wed Jun 27 04:48:45 2001 NAS-IP-Address = “172.16.25.15” NAS-Port = 5 User-Name = “username1” Client-Port-DNIS = “4327528” Caller-ID = Acct-Status-Type = Stop Acct-Authentic = RADIUS Service-Type = Exec-User Acct-Session-Id = “0000000D” Acct-Delay-Time = 0 User-Id = “username1” NAS-Identifier = “172.16.25.15” The following example shows the information contained in a TACACS+ network accounting record for a PPP user who first started an EXEC session:
Wed Jun 27 04:00:35 2001 172.16.25.15 username1 tty4 562/4327528 starttask_id=28 service=shell Wed Jun 27 04:00:46 2001 172.16.25.15 username1 tty4 562/4327528 starttask_id=30 addr=10.1.1.1 service=ppp Wed Jun 27 04:00:49 2001 172.16.25.15 username1 tty4 408/4327528 updattask_id=30 addr=10.1.1.1 service=ppp protocol=ip addr=10.1.1.1 Wed Jun 27 04:01:31 2001 172.16.25.15 username1 tty4 562/4327528 stoptask_id=30 addr=10.1.1.1 service=ppp protocol=ip addr=10.1.1.1 bytes_in=2844 bytes_out=1682 paks_in=36 paks_out=24 elapsed_time=51 Wed Jun 27 04:01:32 2001 172.16.25.15 username1 tty4 562/4327528 stoptask_id=28 service=shell elapsed_time=57 Configuring Accounting Network Accounting Configuring Accounting 6