cisco — Enabling Automated Double Authentication

6. (Optional) Configure the access-profile command as an autocommand. If you configure the autocommand, remote users will not have to manually enter the access-profile command to access authorized rights associated with their personal user profile. If the access-profile command is configured as an autocommand, users will still have to Telnet to the local host and log in to complete double authentication. Note Follow these rules when creating the user-specific authorization statements (These rules relate to the default behavior of the access-profile command): • Use valid AV pairs when configuring access control list AV pairs on the security server.

• For remote users to use the interface’s existing authorization (that which existed prior to the second stage authentication/authorization), but you want them to have different access control lists (ACLs), you should specify only ACL AV pairs in the user-specific authorization definition. This might be desirable if you set up a default authorization profile to apply to the remote host, but want to apply specific ACLs to specific users.

• When these user-specific authorization statements are later applied to the interface, they can either be added to the existing interface configuration or they can replace the existing interface configuration--depending on which form of the access-profile command is used to authorize the user. You should understand how the access-profile command works before configuring the authorization statements. • If you will be using ISDN or Multilink PPP, you must also configure virtual templates at the local host. Enabling Automated Double Authentication You can make the double authentication process easier for users by implementing automated double authentication.

Automated double authentication provides all of the security benefits of double authentication, but offers a simpler, more user-friendly interface for remote users. With double authentication, a second level of user authentication is achieved when the user Telnets to the network access server or router and enters a username and password. With automated double authentication, the user does not have to Telnet to the network access server; instead the user responds to a dialog box that requests a username and password or personal identification number (PIN). To use the automated double authentication feature, the remote user hosts must be running a companion client application.

Automated double authentication, like the existing double authentication feature, is for Multilink PPP ISDN connections only. Automated double authentication cannot be used with other protocols such as X.25 or SLIP. Note Automated double authentication is an enhancement to the existing double authentication feature. To configure automated double authentication, you must first configure double authentication by completing the following steps: 1. Enable AAA by using the aaa-new model global configuration command. 2.

Use the aaa authentication command to configure your network access server to use login and PPP authentication method lists, then apply those method lists to the appropriate lines or interfaces. 3. Use the aaa authorization command to configure AAA network authorization at login. Configuring Authentication Enabling Automated Double Authentication Configuring Authentication 27