Step 1 1. Configure IPv4/IPv6 Loopback interface. VTEP(config)# interface Loopback1 VTEP(config-if)# ipv6 address ABCD:1::2/128 VTEP(config-if)# ipv6 ospf 1 area 0 2. Enable Dual Stack. VTEP(config)# interface nve1 VTEP(config-if)# vxlan encapsulation dual-stack prefer-ipv6 Configuring BGP EVPN VXLANv6 Migration from VXLANv4 to VXLANv6 Step 3 • Configure all VTEPs to support only IPv6. VTEP(config)# interface nve1 VTEP(config-if)# member vni 20011 mcast-group FF0E::11 VTEP(config-if)# vxlan encapsulation ipv6 • The fabric switches to IPv6 encapsulations. Configuring BGP EVPN VXLANv6 8