cisco — Configuring BGP PE to CE Routing Sessions

Configuring BGP PE to CE Routing Sessions Procedure Configuring Multi-VRF CE Configuring BGP PE to CE Routing Sessions Command or Action Purpose Step 7 end Example: Device(config-router)#end Returns to privileged EXEC mode. Step 8 show ip ospf process-id Example: Device#show ip ospf 1 Verifies the configuration of the OSPF network. Step 9 copy running-config startup-config Example: Device#copy running-config startup-config (Optional) Saves your entries in the configuration file. Command or Action Purpose Step 1 configure terminal Example: Device#configure terminal Enters global configuration mode. Step 2 router bgp autonomous-system-number Example:

Device(config)#router bgp 2 Configures the BGP routing process with the AS number passed to other BGP routers, and enter router configuration mode. Step 3 network network-number mask network-mask Example: Device(config-router)#network 5 mask 255.255.255.0 Specifies a network and mask to announce using BGP. Step 4 redistribute ospf process-id match internal Example: Device(config-router)#redistribute ospf 1 match internal Sets the switch to redistribute OSPF internal routes. Configuring Multi-VRF CE 10