Configuring Multi-VRF CE Configuring Multicast VRFs Command or Action Purpose Device(config-vrf)#ip multicast-routing vrf vpn1 distributed Step 9 interface interface-id Example: Device(config-vrf)#interface gigabitethernet 1/0/2 Specifies the Layer 3 interface to be associated with the VRF, and enter interface configuration mode. The interface can be a routed port or an SVI. Step 10 ip vrf forwarding vrf-name Example: Device(config-if)#ip vrf forwarding vpn1 Associates the VRF with the Layer 3 interface. Step 11 ip address ip-address mask Example: Device(config-if)#ip address 10.1.5.1 255.255.255.0 Configures IP address for the Layer 3 interface. Step 12 ip pim sparse-dense mode Example:
Device(config-if)#ip pim sparse-dense mode Enables PIM on the VRF-associated Layer 3 interface. Step 13 end Example: Device(config)#end Returns to privileged EXEC mode. Step 14 show ip vrf [brief | detail | interfaces] [vrf-name] Example: Device#show ip vrf detail vpn1 Verifies the configuration. Displays information about the configured VRFs. Step 15 copy running-config startup-config Example: Device#copy running-config startup-config (Optional) Saves your entries in the configuration file. Configuring Multi-VRF CE 8