35 networks peaked at 13:38:38 May 6 2022 UTC (03:30:25.802 ago) Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd 172.16.255.1 4 65001 539 538 144 0 0 06:46:58 31 172.16.255.3 4 65001 467 538 144 0 0 06:46:54 6 172.16.255.4 4 65001 474 537 144 0 0 06:46:54 19 172.16.255.6 4 65001 480 538 144 0 0 06:46:57 9 Return to Verifying the Configuration of Optimized Layer 2 Multicast Example6:ConfiguringOptimizedLayer2OverlayMulticastInterworkingwith External Network for IPv4 and IPv6 This example shows how to configure Optimized Layer 2 Overlay Multicast for IPv4 and IPv6 traffic in an EVPN VXLAN fabric that has ingress replication enabled in the underlay and multicast traffic is handedoff to an external network.
For IPv4 multicast traffic, refer Topology for Optimized Layer 2 Overlay Multicast Interworking with External Network . Figure 9: Topology for Optimized Layer 2 Overlay Multicast Interworking with External Network for IPv6 Traffic The topology shows an EVPN VXLAN fabric, with two spine switches and three VTEPs, connected to an external network. Multicast traffic source is located in Layer 2 VTEP 1 and receivers are located in Layer 2 VTEP 3, the Centralized Gateway, and also located in the external network. Centralized gateway (CGW) is configured on VTEP 2. VLAN 101 has IGMPv2 and MLD enabled and VLAN 102 has IGMPv3 and MLD Configuring Optimized Layer 2 Overlay Multicast Example 6:
Configuring Optimized Layer 2 Overlay Multicast Interworking with External Network for IPv4 and IPv6 Configuring Optimized Layer 2 Overlay Multicast 137