Verifying and Monitoring WCCP Configuration Settings Procedure Configuration Examples for WCCP The following sections provide examples associated with WCCP configuration. Configuring WCCP Verifying and Monitoring WCCP Configuration Settings Command or Action Purpose Step 1 enable Example: Device> enable Enables privileged EXEC mode. • Enter your password if prompted. Step 2 show ip wccp [web-cache |service-number] [detail view] Example:
Device# show ip wccp 24 detail Displays global information related to WCCP, including the protocol version running, the number of content engines in the router service group, which content engine group is allowed to connect to the router, and which access list is being used. • service-number—(Optional) Dynamic number of the web-cache service group being controlled by the content engine. The range is from 0 to 99. For web caches that use Cisco Content Engines, the reverse proxy service is indicated by a value of 99. • web-cache—(Optional) statistics for the web-cache service. • detail—(Optional) other members of a particular service group or web cache that have or have not been detected.
• view—(Optional) information about a router or all web caches. Step 3 show ip interface Example: Device# show ip interface Displays status about whether any ip wccp redirection commands are configured on an interface; for example, “Web Cache Redirect is enabled / disabled.” Step 4 more system:running-config Example: Device# more system:running-config (Optional) Displays contents of the running configuration file (equivalent to the show running-config command). Configuring WCCP 16