5-2-2 Installation to Screen This IAG is intended to be used as the following: When the button for GI-S Series Unit, which is displayed by the IAG “EtherNet_IP_Network Monitor” or IAG” DLR_Monitor” located on another page, is pressed, the currently displayed page switches to the page with this IAG and the IAG accesses to the Unit to receive the necessary information to display. Pressing the Back button in a page works as the trigger to back to the previously displayed screen. To use these functionalities, implement the settings described below.
Events and Actions Settings for IAG on the page before transition Set the action ShowPage for the event SelectGI_S in IAG “EtherNet_IP_NetworkMonitor” or IAG “DLR_Monitor” and enter the page name in which the IAG is placed. Property Assignment for IAG on the page before transition Assign the following properties (Input/Output) of IAG “EtherNet_IP_NetworkMonitor” or IAG “DLR_Monitor” to the following variable. Property Assignment for IAG “DLR Monitor” Assign the following properties (Input/Output) of this IAG to the following variable. The IP address and the page before transition information is shared by this operation.
19 Event Description SelectGI S _ Executed when a GI-Series Unit is selected. Enter the name of the page where the IAG is placed. Property (Input/Output) Description Variable Name Data Type SelectDeviceIPAddress IP address of the displayed unit SelectDeviceAddress String CurrentPageName Page name where this IAG is located PreviousPageName String Property (Input/Output) Description Variable Name Data Type SelectDeviceIPAddress IP address of the displayed unit SelectDeviceAddress String PreviousPageName Page name that changes after the end of this page PreviousPageName String