4 Library Versions This chapter describes the versions of the IAG library. You must check versions of the items listed in the table below before using the library. Versions of IAG collection, NA runtime, and OS in this guide EtherNet I/P devices that the IAG collection supports, and the versions 11 Item Description How to Check the Version IAG Collection IAG Collection The distributed IAG collection has library versions. The version can be checked in the Sysmac Studio IAG Collections Manager pop-up. IAG Version of each IAG. It manages specification change, bug correction, and others. The version can be checked as an IAG property in IAG Collections Manager.
Also, in Properties after located as an object. NA The version of NA with which IAG has been created. IAG library is not applicable to older versions than that in this guide because supported functions depend on versions. See Minimum supported HMI version in IAG Collections Manager. NA OS The version which NA runtime can operate. It differs according to NA’s Runtime version. System Menu of NA. It will be checked if necessary when you upgrade NA runtime version of a project in Sysmac Studio. Version Version Remarks IAG Collection Ver1.00 Filename extension is “.iag”. IAG Noted individually Refer to Chapter5 “Properties.” NA Ver. 1.11 and later NA OS Ver.
7.3.0 and later Supported Device Version Remarks NX-CSG320 Ver. 1.00 and later Operation tested with Ver. 1.00 NX102□□□□ Ver. 1.31 and later Operation tested with Ver. 1.31 NX102□□□□ Ver. 1.18 and later Operation tested with Ver. 1.18 NX7□□□□ Ver. 1.18 and later Operation tested with Ver. 1.18 1783-ETAP Ver. 2.02 and later Operation tested with Ver. 2.02 GI-S□D□□□□ Ver. 1.2 and later Operation tested with Ver. 1.2