5-1-2 Installation to Screen Property Assignment This IAG reads and displays the configuration information of an EtherNet/IP device that connected to NA’s Ethernet port. Assign a variable to the following property (Input/ Output) in order to share the IP address information of the EtherNet/IP device pressed on the screen with each device’s detailed information page. ■Screen with IAG （ initial screen ） When you change screens or press the [Read configurations] button, the configuration of an EtherNet/IP device is read out and displayed on the screen. When you press an EtherNet/IP device button to select, the IP address is assigned to the variable.
SelectDeviceIPAddress CurrentPageName Non-retentive variable area SelectDeviceIPAddress PreviousPageName 20 Property (Input/Output) Description Data Type SelectDeviceIPAddress IP address of device to display CurrentPageName Page name where this IAG is located