2 Precautions (1) When building an actual system, check the specifications of the component devices of the system, use within the ratings and specified performance, and implement safety measures such as safety circuits to minimize the possibility of an accident. (2) For safe use of the system, obtain the manuals of the component devices of the system and check the information in each manual, including safety precautions, precautions for safe use. (3) It is customer’s responsibility to check all laws, regulations, and standards that the system must comply with. (4) All rights reserved.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, or by any means, mechanical, electronic, photocopying, recording, or otherwise, without the prior written permission of OMRON. (5) The information in this guide is current as of February 2020. It is subject to change without notice because of product’s update. (6) This IAG library has been tested with the system configuration in 3-2 “System Configuration.” However, Omron does not guarantee screen operations after embedding the IAGs. Special information in this document is classified as follows:
Precautions for Safe Use Describes precautions on what to do and what not to do to ensure proper operation and performance. Precautions for Correct Use Describes precautions on what to do and what not to do to ensure proper operation and performance. Additional Information Additional information to read as required. This information is provided to increase understanding or make operation easier. Copyrights and Trademarks Sysmac® is the trademark or registered trademark of Omron Corporation in Japan and other countries for Omron factory automation products. Screenshots are used in accordance with Microsoft Corporation guidelines.
Windows and Visual Basic are registered trademarks of Microsoft Corporation in the United States and other countries. EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany. EtherNet/IP™ and CIP Safety™ are trademarks of ODVA, Inc. Company names and product names in this document are the trademarks or registered trademarks of their respective companies. 8