How to Design For this screen design, implement the settings described below. Events and Actions Settings for Previous Screen Set the action ShowPage for the event SelectNXR_D_SeriesEvent of the IAG IOStatus_Monitor (NXR-ILM Monitor category). Then enter the page name in which this IAG is placed. IAG Property Assignment (Previous Screen) Assign the variables to the following properties (Input/Output) for IOStatus_Monitor. Property Assignment (IAG) Assign the variables to the following properties. Now the information about IP address and port number are shared among screens. Screen Settings Place the Return button on the page containing this IAG.
Then set the action ShowPage for the button event Release . Next, enter the name of the previous page in which the IAG IOStatus_Monitor is placed. Additional Information The type of button is not specified. 19 Event Description SelectNXR D SeriesEvent _ _ Executed when an NXR-D Series Unit is selected. Enter the name of the page where this IAG is placed.
Property (Input/Output) Description Variable Variable Data Type SelectDeviceIPAddress IP address of the device to be displayed SelectDeviceAddress String SelectIOLinkPortNo Port number of the device to be displayed SelectIOLinkPortNo Byte Property (Input/Output) Description Variable Variable Data Type SelectDeviceIPAddress IP address of the device to be displayed SelectDeviceAddress String SelectIOLinkPortNo Port number of the device to be displayed SelectIOLinkPortNo Byte Enter the name of the page where the IAG IOStatus Monitor is _ placed.