５ - ５ Displaying Multiple IAG Screens and Linking Them to EIP Monitor Screen Combination of this IAG collection and the IAG EtherNet_IP_NetworkMonitor or DLR_Monitor enables the EIP Monitor Screen in other page to display various information about the NXR-ILM Unit. This section provides how to perform the following processing. When the button for NXR- ILM Unit with any node address, which is displayed by the IAG EtherNet_IP_Network Monitor or DLR_Monitor located on another screen, is pressed, the currently displayed screen switches to IO Status Monitor , the initial screen of this IAG collection and accesses to the Unit to get information to display.
Pressing either of the screen switching buttons on the EIP Status Screen or DC Power Status Screen switches the screen, and the information is acquired and displayed by accessing to the Unit. In the case that the EIP Status Screen or DC Power Status Screen acquires the FCS error frequency log or DC voltage log respectively, pressing the screen switching button on the Statistical Information Screen switches the currently displayed screen. Then allows the NA to access to the Unit to collect the data to display. When you press the Return button in this IAG, the screen switches to the previous screen where the IAG EtherNet_IP_NetworkMonitor is placed.
Additional Information As an example, the initial page for the IO-Link master unit is the screen with the IAG IOStatus_Monitor. Any screen can be designated as the initial page. 44