2 Common Specifications of IAG Executing Backup of NA-series Programmable Terminal IAGs write the HMI project downloaded to the NA-series Programmable Terminal to the specified save-in location. Simultaneously, they also write the data to the SD Memory Card in the NA-series Programmable Terminal and save as the latest backup data.
NA-series Programmable Terminal 2-1 Function 2 2-1-2 Restore Save-in location of backup data USB Memory FTP server Ethernet NA-series data NJ/NX-series data NX-series Safety Control Unit data NX-series CPU Unit NJ/NX-series Safety Control Unit* NX-series Communication Control Unit Backup data * Cannot be mounted to NJ-series CPU Units 2-1-2 Restore You can restore devices with their backup data you saved using IAGs. To restore a device, you need its backup data saved in the USB flash drive on the NA-series Programmable Terminal, or its latest backup data saved in the SD Memory Card. You cannot read the data directly from the FTP server to use it for the restore.
You can start a restore only by pressing the IAG button. 2-5 Programmable Terminals NA-series Practices Guide NJ/NX/NA-series Backup and Restore IAG (V127) (1) Transfer data Dat ory Card (1) Transfer data Card Dat a SD Mem ory Ca Card D Memory Card