2 Common Specifications of IAG Executing Restore of NX-series Safety Control Units IAGs read out the Safety Unit restore file of the NX-series Safety Control Unit from the USB flash drive or the latest backup in the SD Memory Card on the NA-series Programmable Terminal, and then write it to the SD Memory Card in the NJ/NX-series CPU Unit. NA-series Programmable Terminal NA-series data NX-series data NX-series Safety Control Unit data Ethernet (1) Transfer data Data used for restoration NX-series CPU Unit NX-series Safety Control Unit NX-series Communication Control Unit Precautions for Correct Use You cannot use IAGs to restore NX-series Safety Control Units.
You need to use the Safety Unit restore function for such restore. 2-8 Programmable Terminals NA-series Practices Guide NJ/NX/NA-series Backup and Restore IAG (V127) ory Card USB Memory SD Mem ory Ca Card B Memory B Memory US B Memory Restore by using restore function. operation require Card the Safety Unit Unit switch d. Data using ction. equire the Unit d. D Memory Card