M.H.C.V. Product - Trailer plug has to be specified at VP level choosing one of the 2 alternatives given below : * CCP 1473 - 7 Pole trailer plug * CCP 2085 - 15 Pole trailer plug - ISO Note: Trailer Plugs (CCP1473 and CCP2085) are now available across the entire Eurocargo range in this case rear cross member has always to be specified (also without CCP 430 - towing version-). - When ordering an R version model , if a factory fitted towing hook is ordered, the VP must include NOT ONLY the hook type BUT ALSO the specific brand.
- As per New Eurocargo, if necessary, an optional suitable rear axle ratio, should also be specified, but be aware that R versions have no longer restrictions in terms of rear axle ratio availability. This is in order to avoid penalising operators who specify R versions, but operate trucks mainly as solo versions (e.g. Germany). As a consequence, more attention will be required in determining the actual use of vehicle to specify, case by case, the right rear actual ratio (see "Performance" chapter). - For R version models with air suspension , specially in the 12-19 ton range , it is advisable to specify also an increased air compressor (CCP 6319:
360 cc air compressor ) Commercial Documentation - Eurocargo Euro 4 Page No. B.40