2 Operation CP1L-EL/EM PLCs with no DIP switches Use the following CX -Programmer settings to configure the Option Board slot for Peripheral Bus (Toolbus) usage. Transfer these settings to the PLC and cycle power to apply the changes. • Custom Port Settings • Baud 115200 • Format 7,2,E • Mode Toolbus 2-4 Grid Connect Modbus/TCP Adapter Application and Setup Guide Switch No. Setting Description Application Default ON Used for peripheral bus (Toolbus). Used to enable a Serial Communications Option Board mounted in Option Board Slot 1 to be used by the peripheral bus. OFF According to PLC Setup. ON Used for peripheral bus (Toolbus).
Used to enable a Serial Communications Option Board mounted in Option Board Slot 1 to be used by the peripheral bus. OFF According to PLC Setup.