omron — e418_fiber_sensor_selection_selection_guide_en.pdf

10 Standard Installation Hex-shaped Models • You can easily mount these Fiber Units by making a hole in the bracket and tightening just one nut. • The cable follows the wall, so extra space is not required, and the cable will not get caught on other objects. Cable remains out of the way. Tightened Tighten nut with two nuts. at only one place. • A Fiber Unit with Build-in Lens is the new standard in fiber units. We recommend this new standard Fiber Unit that achieves stable detection with a high-power beam. You don’ t have to worry about the lens falling off and getting lost. Through-beam Flat Fiber Units are also available.

( 16 page) Specifications Through-beam Fiber Units Sensing distance (mm) Optical axis Aperture Bending diameter 11 Page angle Size Appearance (mm) radius E3X-ZV E3NX-FA (minimum Models Dimensions of cable sensing No. GIGA HS Other modes GIGA HS Other modes object) 14.4 Approx. Flexible, 4,000* ST : 3,500 4,000* ST : 4,000* 2.3 dia. (0.1 dia./ E32-LT11N 2M 11-A 15° M4 R2 2,300 SHS: 920 3,450 SHS: 920 0.03 dia.) M4 IP50 Approx. 14.7 Flexible, 2,000 ST : 1,000 3,000 ST : 1,500 1 dia. 60° R1 (5 μm dia./ E32-T11N 2M 11-B M4 700 SHS: 280 1,050 SHS:

280 2 μm dia.) IP67 Reflective Fiber Units Sensing distance (mm) Optical axis Aperture Bending diameter 11 Page angle Size Appearance (mm) radius E3X-ZV E3NX-FA (minimum Models Dimensions of cable sensing No. GIGA HS Other modes GIGA HS Other modes object) 15.8 Approx. 840 ST : 350 1,260 ST : 520 (0.1 dia./ 15° M6 0.03 dia.) E32-LD11N 2M 11-C M6 240 SHS: 100 360 SHS: 100 IP50 Coaxial 18.5 290 ST : 130 440 ST : 190 M3 Flexible, E32-C21N 2M 11-D M3 R2 90 SHS: 39 130 SHS: 39 (5 μm dia./ IP67 2 μm dia.) 13.5 Approx. M4 840 ST : 350 1,260 ST : 520 E32-D21N 2M 11-E 60° M4 IP67 240 SHS: 100 360 SHS: 100 Coaxial 24 M6 Fle Rxi 4ble, 780 ST : 350 1,170 ST : 520 ( 25 μμ mm dd ii aa ..

)/ E32-C91N 2M 11-F M6 IP67 220 SHS: 100 340 SHS: 100 Retro-reflective Fiber Units (With M.S.R. Function) Sensing distance (mm) Optical axis Aperture Bending diameter 11 Page angle Size Appearance (mm) radius E3X-ZV E3NX-FA (minimum Models Dimensions of cable sensing No. GIGA HS Other modes GIGA HS Other modes object) 44 8.5 1,350 2,020 A 15p °prox. M6 15.8 80 Fle Rxi 2ble, S ST : :1, 52 50 00 S ST : 1, 58 50 00 - E 3 2 - L R + P1 11NP 2M 11-G M6 1,000 H S 1,500 H S : E 3 9 - R IP50 * The optical fiber is 2 m long on each side, so the sensing distance is 4,000 mm. Note 1. The following mode names and response times apply to the modes given in the Sensing distance column. [E3X-ZV] GIGA:

Giga-power mode (16 ms), HS: High-speed mode (250 μs), ST: Standard mode (1 ms), and SHS: Super-high-speed mode (50 μs) [E3NX-FA] GIGA: Giga-power mode (16 ms), HS: High-speed mode (250 μs), ST: Standard mode (1 ms), and SHS: Super-high-speed mode (30 μs) 2. The values for the minimum sensing object are reference values that indicate values obtained in standard mode with the sensing distance and sensitivity set to the optimum values. The first value is for the E3X-ZV and the second value is for the E3NX-FA. 3. The sensing distances for Reflective Sensors are for white paper. (The sensing distances for the E32-LD11N 2M are for glossy white paper). 4.

With Retro-reflective Models, objects with a high reflection factor may cause the Fiber Sensor to detect reflected light as incident light. Also, stable detection may not be possible for transparent objects. Check suitability beforehand. 5. The E3X-HD Series offers the same sensing distance as the E3X-ZV.

Fiber Sensor Features Selection Guide Fiber Units Standard Installation Threaded Hex-shaped Cylindrical Saving Space Flat Sleeved Beam Improvements Small Spot High Power Narrow view BGS Transparent Objects Retro- reflective Limited- reflective nvironmental Immunity Chemical- resistant, Oil-resistant Bending Heat- resistant E Area Detection Applications Liquid-level Vacuum FPD, Semi, Solar Liquid-level Vacuum FPD, Semi, Solar Installation Information Fiber Amplifiers, Communications Unit, and Accessories Technical Guide and Precautions Model Index 10 Aperture angle Size A ppearance (mm) Bending radius of cable Sensing distance (mm) Optical axis diameter (minimum sensing object) Models 11 Page Dimensions No.

E3X-ZV GIGA HS E3NX-FA GIGA HS Approx. 15° M4 14.4 M4 Flexible, R2 4,000* 2,300 Other modes ST : 3,500 SHS: 920 4,000* 3,450 Other modes ST : 4,000* SHS: 920 2.3 dia. (0.1 dia./ 0.03 dia.) E32-LT11N 2M Approx. 60° IP50 14.7 M4 IP67 Flexible, R1 2,000 700 ST : 1,000 SHS: 280 3,000 1,050 ST : 1,500 SHS: 280 1 dia. (5 μm dia./ 2 μm dia.) E32-T11N 2M IP67 Aperture angle Size A ppearance (mm) Bending radius of cable Sensing distance (mm) Optical axis diameter (minimum sensing object) Models 11 Page Dimensions No. E3X-ZV GIGA HS E3NX-FA GIGA HS Approx. 15° M6 15.8 M6 IP50 2 2 Flexible, R2 90 2 Flexible, R4 2 840 40 Other modes ST : 350 SHS: 100 1,260 360 Other modes ST : 520 SHS:

100 (0.1 dia./ 0.03 dia.) E32-LD11N 2M 11-C Approx. 60° Coax M3 M4 Coax M6 ial 18.5 M3 IP67 13.5 M4 IP67 ial 24 M6 IP67 90 840 40 780 20 ST : 130 SHS: 39 ST : 350 SHS: 100 ST : 350 SHS: 100 440 130 1,260 360 1,170 340 ST : 190 SHS: 39 ST : 520 SHS: 100 ST : 520 SHS: 100 (5 μm dia./ 2 μm dia.) (5 μm dia./ 2 μm dia.) E32-C21N 2M E32-D21N 2M E32-C91N 2M 11-D 11-E 11-F IP67 Aperture angle Size A ppearance (mm) Bending radius of cable Sensing distance (mm) Optical axis diameter (minimum sensing object) Models 11 Page Dimensions No. E3X-ZV GIGA HS Other modes E3NX-FA GIGA HS Other modes Approx. 15° M6 44 8.5 15.8 80 M6 1, Flexible, R2 1 350 ,000 ST :1,200 SHS: 550 2,020 1,500 ST : 1,800 SHS:

550 - E32-LR11NP 2M + E39-RP1 11-G