Sleeve Models (Close-range Detection) Saving Space Through-beam Reflective 20 Page This Page • Sleeve Fiber Units allow detection away from the point of installation for stable close-range detection of small objects. • The shape of sleeve can be changed freely. (Refer to the sleeve bending specifications in the Appearance column of the specifications table.) Specifications Reflective Fiber Units Note 1. The following mode names and response times apply to the modes given in the Sensing distance column. [E3X-ZV] GIGA: Giga-power mode (16 ms), HS: High-speed mode (250 μs), ST: Standard mode (1 ms), and SHS: Super-high-speed mode (50 μs) [E3NX-FA] GIGA: Giga-power mode (16 ms), HS:
High-speed mode (250 μs), ST: Standard mode (1 ms), and SHS: Super-high-speed mode (30 μs) The values for the minimum sensing object are reference values that indicate values obtained in standard mode with the sensing distance and sensitivity set to the optimum values. The first value is for the E3X-ZV and the second value is for the E3NX-FA. 3. The sensing distances for Reflective Fiber Units are for white paper. The sensing distances for E3NX-FA are values for E3NX-FA@ models. The distances for E3NX-FAH@ infrared models are different. The E3X-HD Series offers the same sensing distance as the E3X-ZV. 2. 4. 5.
22 Fiber Sensor Features Selection Guide Fiber Units Standard Installation Threaded Hex-shaped Cylindrical Saving Space Flat Sleeved Small Spot Improvements High Power Narrow view Beam BGS High Power Narrow view BGS Transparent Objects Retro- reflective Limited- reflective Environmental Immunity Chemical- resistant, Oil-resistant Bending Heat- resistant Applications Area Detection Liquid-level Vacuum FPD, Semi, Solar Installation Information Fiber Amplifiers, Communications Unit, and Accessories Technical Guide and Precautions Model Index 22 Sensing direction Appearance (mm) Bending radius of cable Sensing distance (mm) Optical axis diameter (minimum sensing object) Models 23 Page Dimensions No.
E3X-ZV GIGA HS Other modes E3NX-FA GIGA HS Other modes Side-view The sleeve 20 cannot be bent. 15 3 dia. 2 dia. IP67 Flexible, R1 70 20 ST : 30 SHS: 8 100 30 ST : 45 SHS: 8 (5 μm dia./ 2 μm dia.) E32-D24R 2M IP67 Sleeve bending 15 radius: 65 25 mm 4.8 dia. 2.1 dia. IP67 R25 120 45 ST : 53 SHS: 14 18 0 ST : 79 SHS: 14 E32-D24-S2 2M 67 IP67 Top-view The sleeve cannot be bent. 15 3 1.5 dia. 0.5 dia. IP67 R4 28 8 ST : 12 SHS: 4 42 12 ST : 18 SHS: 4 E32-D43M 1M IP67 The sleeve cannot 15 be bent. 15 2 dia. 0.5 dia. IP67 14 4 ST : 6 SHS: 2 21 6 ST : 9 SHS: 2 E32-D331 2M IP67 T cah ne n s ole t eve 20 be bent. 15 3 dia. 0.8 dia. IP67 R25 70 20 ST : 30 SHS: 8 100 30 ST : 45 SHS:
8 E32-D33 2M IP67 The sleeve cannot 5 15 be bent. 3 dia. 0.82 dia. IP67 R4 63 18 ST : 27 SHS: 7 94 27 ST : 40 SHS: 7 E32-D32-S1 0.5M IP67 The sleeve 15 c ba en bn eo nt t. 15 M3 0.82 dia. IP67 E32-D31-S1 0.5M IP67 Sleeve bending 11 radius: 5 mm 40 M3 1.2 dia. IP67 Flexible, R1 140 40 ST : 60 SHS: 16 2 60 10 ST : 90 SHS: 16 E32-DC200F4R 2M IP67 The sleeve 15 cannot be bent. 22 4 dia. 1.65 dia. IP67 R10 25 0 ST : 110 SHS: 30 37 0 ST : 160 SHS: 30 E32-D22-S1 2M IP67 Sleeve bending 16 radius: 10 mm 67 M4 1.65 dia. IP67 72 100 E32-D21-S3 2M IP67 The sleeve 17 cannot be bent. 90 M6 2.5 dia. IP67 Flexible, R1 84 0 ST : 350 0 SHS: 100 1,2 60 ST : 520 SHS:
100 E32-DC200BR 2M 24 360 IP67 Sleeve bending 15 10 r 1a 0d mius m: 67 3 1.65 dia. IP67 R10 25 0 ST : 110 SHS: 30 370 ST : 160 SHS: 30 E32-D25-S3 2M 72 100 IP67