E3X-ZV Fiber Amplifiers, Communications Unit and Accessories I/O Circuit Diagrams NPN Output PNP Output Nomenclature E3X-ZV11 E3X-ZV41 E3X-ZV6 E3X-ZV8 [Output Indicator: Orange] Turns ON when the output is ON. [Smart Tuning Indicator: Green] Lit up after normal completion of Smart Tuning. Put out when the detection function is changed or a tuning error occurs. Threshold Level (Green) Incident Light Level (Red) Digital display part [+ / - Button] Used to tune the threshold. [Tuning button] Executes Smart Tuning. [MODE Button] Use to switch between Detection Mode and Setting Mode.
90 Fiber Sensor Features Selection Units Guide Fiber Installation Threaded Hex-shaped Standard Cylindrical Hex-shaped Cylindrical Saving Space Flat Sleeved Beam Improvements Small Spot High Power Narrow view BGS Transparent Objects Retro- reflective Limited- reflective Environmental Immunity Chemical- resistant, Oil-resistant Bending Heat- resistant Applications Area Detection Liquid-level Vacuum FPD, Semi, Solar Installation Information Fiber Amplifiers, Communications Unit, and Accessories Technical Guide and Precautions Model Index 90 Model Operation mode Timing chart Output circuit E3X-ZV11 E3X-ZV6 Light-ON Incident light No incident light OUT indicator Lit (orange) Not lit Output ON transistor OFF Load Operate (e.g., relay) Reset (Between brown and black leads) Display OUT indicator (orange) Brown Load Black Control output Photoelectric 12 to sensor main 24 VDC circuity Blue Dark-ON Incident light No incident light OUT indicator Lit (orange) Not lit Output ON transistor OFF Load Operate (e.g., relay) Reset (Between brown and black leads) Model Operation mode Timing chart Output circuit E3X-ZV41 E3X-ZV8 Light-ON Incident light No incident light OUT indicator Lit (orange) Not lit Output ON transistor OFF Load Operate (e.g., relay) Reset (Between blue and black leads) DisplayOUT indicator (orange) Brown Control Photoelectric Black output 12 to sensor main 24 VDC circuity Load Blue Dark-ON Incident light No incident light OUT indicator Lit (orange) Not lit Output ON transistor OFF Load Operate (e.g., relay) Reset (Between blue and black leads)