Ref :UM-CT7-11-001 Issue : 01 Date : 28/04/2011 Page 28 of 35 7.3.4 Measurement Configuration (Configuration des measures) This function allows the user to define modify or cancel measurement CARTs, read the CARTs that are memorized in the CT7 and load CARTs in the CT7 memory. These tasks are managed and performed through a graphic interface as shown bellow. Loading from an external file (Chargement fichier) Saving in an external file (Sauvegarde fichier) Reading from CT (Lecture VT7) Writing to CT7 (Ecriture CT7) The first two commands allow exchanging lists of CARTs between an external folder that you have defined and a CT7 instrument.
This might be useful when several CT7 must work with the same choice of CARTs for instance. The last two commands allow exchanging a list of CARTs between the PC and any CT7 instrument. In the list, each line is a CART for which you may chose a name and select any combination of measurements. There should be at least one measurement on each CART. The first CART, NORMAL (# 0) contains all measurement and cannot be modified or removed. This document is OPO property. It may not be either used or copied without authorization. OPO sprl, Crawhez 9, 4890 Thimister Clermont, Belgium. +32 87688989 - +32 87598990