Chapter3 Handling Restrictions The following describes restrictions on using [High speed batch label printing]. • Accuracy of print position in the paper feed direction may be lowered. • You cannot use functions that are designed to operate for each single label on an application. • Both [Cut] and [Do not cut] options in [Settings For Paper Handling After Print] do not work normally. • The [Notification] and [Pause] settings do not work normally. • Since this batch print function merges multiple labels into one data, it takes longer to start printing compared to normal printing, and information related to the number of printed pages cannot be used.
• If a paper jam occurs, you may lose multiple labels at a time. In addition, multiple labels will be printed when the printer recovers from the error. • Multiple labels merged into up to 400 mm (15.75 inches) length data is counted as one copy. • You cannot stop the printer at a position between labels by pressing the Pause button on the printer. • The number of pages displayed on the panel (e.g., "Printing page 1/1") indicates the number of data pieces compiled, not the actual number of pages printed. How to Set Follow the procedure below to enable [High speed batch label printing]. 1 Open the printer driver window. 2 Click the [Driver Utilities] tab. 132