Chapter3 Handling You can change the following settings; auto cut setting, buzzer (notification) setting, pause setting, ink profile, ratio of black to composite, and ink drying time. For explanation of each setting, refer to the Help. If you print without selecting the check box for [Ink Profile], [Ratio of Black to Composite], and [Drying time per head pass], those settings configured on the printer are applied. The gray out settings shown on the driver screen are not showing the actual settings, but they are default settings of the printer driver.
CAUTION • You can change the driver's default setting of [Auto Cut] (the auto cutter model only), [Notification], and [Pause] following the procedure below. 1. From the Apple menu, select [System Preferences] - [Printers & Scanners]. 2. Select the printer, and then click [Options & Supplies] - [Option]. 3. Change the setting. • If you increase the ratio of black ink, be careful not to touch the printed surface immediately after printing because ink can adhere to your fingers. 9 Check the print settings, and then click [Print] to start printing. 175 3 Extension Settings