Chapter3 Handling 1 Load die-cut label, continuous paper, or full-page label paper with a length of 66.7 mm (2.63 inches) or more into the printer. 2 Select [Print adjustment sheet] from [Adjustment Method], and then click [Start adjustment]. 3 A confirmation window to print the adjustment sheet appears. Check that paper is loaded in the printer and then click [OK]. The adjustment sheet is printed and the first Horizontal Alignment window appears. 4 Check the sheet and then select the number for the pattern with the least gaps or overlapping in #1 group, and then click [OK].
Adjustment sheet print example (for this sheet, select “0”.) 5 A confirmation window to print the adjustment sheet appears again. Click [Yes]. The adjustment sheet is printed and the second Horizontal Alignment window appears. 6 In the same way as step 4, look at the print results and then select a setting value. 7 An adjustment start confirmation window appears. Click [Yes]. 8 When adjustment is complete, a complete window appears. Click [OK]. Vertical Alignment When printed vertical or horizontal lines look skewed or misaligned, or when printed text looks blurred, print the adjustment sheet.
c IMPORTANT When printing the adjustment sheet, load paper that is 99.5 mm (3.92 inches) wide or more and 69.0 mm (2.72 inches) long or more. 212