Chapter3 Handling Settings for Replacing from ZPL II Compatible Monochrome Printer Click [Set...] for [Replace settings from printer using ZPL II commands] to open the setting window. When adjusting, make the adjustment checking actual printouts. Resolution Settings Select the resolution in the [Original Resolution] pull-down menus. If the same resolution is not found in the menus, select one of the closest resolution. For example, if the resolution of the ZPL II compatible monochrome printer you were using is 203 dpi, select 200 dpi.
Monochrome Print Mode Setting If you use the printer just as a replacement of your previous ZPL II compatible monochrome printer and do not perform color printing, select the check box. Vertical/Horizontal Positioning You can adjust the print position of objects such as text, image, or graphic. If you have set the same resolution as the resolution of the ZPL II compatible monochrome printer in the [Original Resolution] setting, set “0” (zero) to both the [Vertical positioning] and [Horizontal positioning].
If the resolution of the ZPL II compatible monochrome printer you were using is 203 dpi, and you have set the [Original Resolution] setting to [200 dpi], set “-1.5” to both the [Vertical positioning] and [Horizontal positioning]. 220