Chapter3 Handling Font Width Setting You can change the font width. At first, set to “100”. If you want to change the height of font or space between lines, configure it on an application. Default character encoding Setting Set the default settings for character encoding. The settings are referenced depending on the content of the print data. Character encoding used Set the character encoding to be used in printing. • Not fixed (Conform to the print data) Conforms to the print data. Depending on the content of the print data, the settings in the [Character code table] and [Default character encoding] are also referenced.
• Setting of [Default character encoding] Printing will be performed conforming to the setting of [Default character encoding]. • Setting of [Character code table] Printing will be performed conforming to the setting of [Character code table]. Applying the Settings When you have finished making necessary settings, click [Apply settings]. All the settings are sent and set to the printer. 223