Chapter3 Handling 233 Setting menu Settings Default Lock Setting General Settings Printer Settings Media Settings Media Layout Width Die-cut Label/ 21.4-108.0[mm]/ 108 mm/ - - ✔ Full-page Label 0.84-4.25[inch] 4.25 inch Continuous Paper/ 25.4-108.0[mm]/ 108 mm/ - - ✔ Wristband 1.00-4.25[inch] 4.25 inch Length 8.0-406.4[mm]/ 174.8 mm/ - - ✔ 0.31-16.00[inch] 6.88 inch Gap between labels Die-cut Label 2.0-6.0[mm]/ 3[mm]/ - - ✔ 0.08-0.24[inch] 0.12[inch] Other than 0.0-6.0[mm]/ 0[mm]/0[inch] - - ✔ Die-cut Label 0.0-0.24[inch] Width Die-cut Label/ 21.4-108.0[mm]/ 108 mm/ - - ✔ Full-page Label 0.84-4.25[inch] 4.25 inch Continuous Paper/ 25.4-108.0[mm]/ 108 mm/ - - ✔ Wristband 1.00-4.25[inch] 4.25 inch Die-cut Label/ Full-page Label 21.4-108.0[mm]/ 0.84-4.25[inch] 108 mm/ 4.25 inch - - ✔ Continuous Paper/ Wristband 25.4-108.0[mm]/ 1.00-4.25[inch] 108 mm/ 4.25 inch - - ✔ Length 8.0-406.4[mm]/ 174.8 mm/ - - ✔ 0.31-16.00[inch] 6.88 inch 8.0-406.4[mm]/ 0.31-16.00[inch] 174.8 mm/ 6.88 inch - - ✔ Gap between labels Die-cut Label 2.0-6.0[mm]/ 3[mm]/ - - ✔ 0.08-0.24[inch] 0.12[inch] Other than 0.0-6.0[mm]/ 0[mm]/0[inch] - - ✔ Die-cut Label 0.0-0.24[inch] Die-cut Label 2.0-6.0[mm]/ 0.08-0.24[inch] 3[mm]/ 0.12[inch] - - ✔ Other than Die-cut Label 0.0-6.0[mm]/ 0.0-0.24[inch] 0[mm]/0[inch] - - ✔ Print Position Adjustment Top Position -10.9 to +10.9[mm] / 0[mm]/0[inch] * Adjust the print start position -0.43 to +0.43[inch] - - ✔ on the media Left Position -1.5 to +1.5[mm] / 0[mm]/0[inch] * Adjust the print start position -0.06 to +0.06[inch] - - ✔ on the media Paper Top Position 0.0 to 3.0[mm] / 0[mm]/0[inch] - - ✔ Adjustment 0.0 to 0.12[inch] Top Position * Adjust the print start position on the media -10.9 to +10.9[mm] / -0.43 to +0.43[inch] 0[mm]/0[inch] - - ✔ Left Position * Adjust the print start position on the media -1.5 to +1.5[mm] / -0.06 to +0.06[inch] 0[mm]/0[inch] - - ✔ Paper Top Position Adjustment 0.0 to 3.0[mm] / 0.0 to 0.12[inch] 0[mm]/0[inch] - - ✔ Media Size Notice On Off - - ✔ Off - - ✔ On Off - - ✔ Off - - ✔