Chapter 1 Product Overview Nozzle Check Settings (Auto nozzle check during printing) You can turn on or off the auto nozzle check during printing. The factory default is “On”. How to Set Set using the operation panel of the printer, or using PrinterSetting. See "Operation Panel Settings" on page 232 or "PrinterSetting (Windows)" on page 190 . Nozzle Check Interval (Setting interval between checks) Specify the number of printouts to let the printer run the nozzle check when reached the number. The printer will stop while running the check. How to Set Set using the operation panel of the printer, or using PrinterSetting.
You can set the number of printouts in the range of 1 to 9999 in units of one sheet. See "Operation Panel Settings" on page 232 or "PrinterSetting (Windows)" on page 190 . • The count of printouts is reset when the specified number is reached and nozzle check is performed, or when the printer is turned off. • The factory default is “100”. Operation At Clogged Nozzle You can set the action to be taken after the number of detected clogged nozzles exceeds the set "Threshold of Clogged Nozzles". How to Set Set using the operation panel of the printer, or using PrinterSetting.
• Notify After performing the operation set by [Cleaning After Nozzle Check], the printer stops and enters in standby mode (pause). Press the pause button to resume printing. Continue Printing After performing the operation set by [Cleaning After Nozzle Check], the printer continues printing without stopping. See "Operation Panel Settings" on page 232 or "PrinterSetting (Windows)" on page 190 . Setting Threshold of Clogged Nozzles Specify the threshold of clogged nozzles used when running the auto nozzle check system.
If the number of clogged nozzles exceed the threshold, a message is displayed on the printer’s screen, and the printer performs the operation set by [Cleaning After Nozzle Check]. If the number of clogged nozzles is below the threshold, you can use the supplemental printing function. How to Set Set using the operation panel of the printer, or using PrinterSetting. 27