Chapter3 Handling • Die-cut label (Black Mark), Die-cut label (Gap) Place the first label 190 to 200 mm (7.48 to 7.87 inches) away from the leading edge of the paper. Less than 190 mm (7.48 inches) from the leading edge of the paper should be liner paper only, with no labels or black marks. Paper feed direction Edge of black mark 190 to 200 mm (7.48 to 7.87 inches) Fanfold Paper The following types/forms of paper can be used. • Continuous paper (Black Mark) • Die-cut label (Black Mark) How to process paper • Continuous paper (Black Mark) Place the first black mark at least 65 mm (2.56 inches) away from the leading edge of the paper.
Do not place the black mark less than 65 mm (2.56 inches) from the leading edge of paper. • Die-cut (Black Mark) Place the first label at least 65 mm (2.56 inches) away from the leading edge of the paper. Less than 65 mm (2.56 inches) from the leading edge of the paper should be liner paper only, with no labels or black marks. Edge of black mark Paper feed direction 65 mm (2.56 inches) or more 293 Edge of black mark Paper feed direction 65 mm (2.56 inches) or more