Chapter2 Setup Installing the Printer Allow sufficient space for the printer. Make sure that the installation location meets the following requirements. • On a level and stable surface with sufficient strength to support the weight of the printer (approx. 13.0 kg [28.66 lb]). • On an area larger than the bottom surface of the printer. • A location that is not subject to vibrations and impacts. • A location where a dedicated power outlet is available. • A location where you can load and remove paper without difficulty. • A location with sufficient space around the printer to allow for installation of accessories, replacement of consumable products, and daily cleaning.
• A location that meets the following environmental requirements. For details, see "Environmental Specifications" on page 374 . If the printer has charged matte black ink and is more likely to be exposed to a temperature of -10 or lower degrees C (14 or lower degrees F), make sure to discharge ink before turning the printer off. Otherwise, the print head may be damaged due to freezing. For details, see "Storing the Printer After Ink is Charged" on page 310 .
CAUTION 40 Temperature Humidity Printing 5 to 35°C (41 to 95°F) 20 to 80% RH, No condensation Storage Gloss black ink -15 to 40°C (59 to 104°F) 5 to 85% RH, No condensation (without being unpacked) Matte black ink -10 to 40°C (50 to 104°F)