Chapter2 Setup Self-Test Printing If you have already installed the printer driver, you can do a test print using the printer driver. Follow the procedure below to do the test print. 1 Open [Devices and Printers]. 2 Right-click the icon of the printer, and then click [Printer properties]. 3 The Printer properties screen appears. Click [Print Test Page] on the screen. If the [Media Detect] setting has been set to [Gap] or [Black mark], the test page is not printed from the first label. However, you can change to print from the first label if you do the settings described in "Processing Paper to Avoid Unprinted Labels" on page 292 . 84