Chapter3 Handling Checking the Gap Between Pages Measure the shifted distance between the tip of the last label printed from the merged data and the actual print start position. Calculate how many millimeters each label is shifted. You can check this by using: the distance the labels have shifted / (the number of labels connected - 1). For example, if six labels are connected in one piece of data, and the sixth label is shifted by 1.0 mm (0.04 inches), you can adjust the gap between pages by 0.2 mm (0.01 inches) to eliminate the shift in all six labels.
1.0 mm (0.04 inches) / (6 labels -1) = 0.2 mm (0.01 inches) Case where the printing position is shifted to the front Case where the printing position is shifted to the back Paper feed direction Paper feed direction First label printed from the compiled data As the printer detects the actual label positions, this is corrected to the correct position. 133 Measurement result -1.0 mm (-0.04 inches) Measurement result +1.0 mm (0.04 inches) Last label printed from the compiled data Measure the distance shifted from the actual label tip. Com (Numbe piled data r of labels: 6) Com (Numbe piled data r of labels: 6)